I ran across a post on social media about New York style bagels. It got me thinking…can I do that in CVap oven? I already knew that I could proof in CVap, but I wanted to know if I could mimic the step where the bagels are boiled.
I found a generic recipe on King Arthur Flour’s website. This was an easy, straightforward recipe. As usual, there’s a point in the recipe that calls for the bagels to be boiled. I chose to go with tradition and boil some, and prepare the others in a CVap oven (as sort of a test and control). I also prepared the water with honey instead of lye, baking soda, malt powder, or other ingredients that people often use, simply because I was aiming for a sweeter bagel.
I prepared my bagels, let the dough proof, shape and rise again. The next step was to boil.
I brushed the proofed bagels with the honey water, and placed them in the CVap Cook & Hold. The unit was set at 200 Doneness and 1 Browning, Constant Cook ON. I elevated the bagels on a baking rack to ensure that the vapor would reach all sides of the bagel for five minutes.
The CVap results were better than expected. The bagels were very similar to the ones that I boiled, but they didn’t rise as much as the boiled bagels.
The next step involved baking. I reserved a few bagels to bake in a conventional oven, and baked the rest in the CVap (90 Doneness, 10 Browning, Constant Cook ON). The recipe recommends baking the bagels, then removing them from the oven to add toppings. This was a bit difficult – the bagels were hot and had to be sprayed with water to make the topping stick. I chose to make a variety of flavors; everything bagel, asiago bagel, asiago jalapeno bagel, and a few plain bagels. The bagels destined for the CVap were much easier, as I was able to top the bagels right after boiling them.
Not only were the CVap bagels easier to prepare, they also browned more evenly.
When they had cooled just enough to not burn my mouth, I dug in. The boiled/oven-baked bagels were much chewier on the exterior, and the toppings fell off. The CVap bagels were a little denser and crisper on the exterior. Both were delicious! A bit more tweaking of recipe and technique would probably result in a seamless process in the CVap. No boiling, no adding toppings mid-bake – painless and delicious!
The sous vide egg bites at Starbucks have become a very popular menu item since their introduction earlier this year. There are many copycat recipes on the web, but my go-to is usually Chef Steps for anything sous vide. They have a great recipe for a version of egg bites made in 4-oz. mason jars. I have a sous vide circulator so that I can compare items cooked sous vide with with those cooked in a CVap oven. The egg bites turned out fantastic. The simplicity of this recipe makes it easy to tweak; you can easily come up with healthy and tasty variations on your egg bites. My trial run in the sous vide water bath was successful, so it was time to try the CVap version.
I used the egg bites recipe (roughly) from Chef Steps to do my jar-less egg bites.
- 8 large eggs (approximately 350g)
- 350g of cottage cheese
- 3g salt
- 3g pepper
Blend the egg mixture thoroughly in a blender. Spray muffin tin with pan spray and fill with the blended egg mixture.
I chose to add cooked, chopped bacon to each of the egg bites.
The mix-ins are pretty wide open for these bites, but I had bacon in the fridge, and who doesn’t love bacon with their eggs? Seriously.
My goal was to mimic the Chef Steps method, where the bites are cooked in a water bath at 185°F for 25 minutes. I set the CVap Cook & Hold to Constant Cook, Doneness to 180°F and Browning to 2. This air temperature differential of 10 degrees keeps the egg bites from getting too much condensation on top. 25 minutes later I had perfectly cooked, firm egg bites.
The bites were easy to remove from the muffin pan, and they were delicious. Tender, velvety texture with the cottage cheese blended in. It was easy and hassle free to make a bunch at a time. Do you like sous vide cooking, but not the hassle and expense of bags or jars? CVap can cook sous vide style without the hassle.
September 15 marks the beginning of National Hispanic History Month. This 30-day observation celebrates the histories, cultures, and contributions of American citizens whose ancestors came from Spain, Mexico, the Caribbean and Central and South America. Enjoying the flavors and culinary influences of this diverse group is a great way to celebrate. This CVap-style tamale recipe, made with slow-cooked pork butt, is a fantastic example of Hispanic cuisine.
Recipe: Pork Tamales, CVap Style
- Pork Butt, 7 to 14 lb Whole
- Tex-Mex Dry Rub of your choice (we used Chef Barry Yates’ secret blend)
- Tamale Sauce of your choice
- Masa, cooked per label instructions
- Corn Husks
Prepare masa and set aside.
Soak corn husks in warm water, set aside.
Apply a layer of dry rub to pork butts as desired.
Preheat a CVap Cook & Hold Oven to 180 + 7 with Constant Cook OFF (high yield). Cook with fat cap up for 7:00 hours.
Hold for a minimum of 6 hours at 150 + 0. (We held for 14 hrs.)
Allow pork to cool and then shred it.
Mix enough tamale sauce into the pork to wet it. You may add additional seasoning (cumin, red pepper) as desired.
Lay out a corn husk, apply a generous spoonful of masa and a spoonful of pork.
Fold the corn husk to envelope the mixture.
Place in pan. You can stack the tamales.
Pour tamale sauce over the top and bake.
Serve immediately with additional tamale sauce and enjoy with a cool beverage!
Summer is winding down. The approach of Labor Day marks the time to pack away your summer whites, and is perhaps your last chance to grill out before the leaves turn and a chill returns to the air. Why not try a unique twist on that perennial grill staple, the burger. Aussie Bison Sliders are a much-loved specialty in Australia. They are absolutely bursting with flavor, and can credibly be called a party in your mouth!
The classic Australian burger is composed something like this:
Our version is similar, but we added a couple of twists and advance staged the burgers to make service and assembly a snap:
Mix one quart of Egg Beaters® and pour onto a sprayed ½ sheet pan.
Cook in a CVap Cook/Hold Oven at 200 + 0 for 20 minutes. Finished product will resemble an egg crepe.
CVap Roasted Beets
Roast whole beets in a CVap Cook/Hold at 200 + 10 for 2 hours with Constant Cook ON, then drop down to 200 + 0 for two hours. After cooking, the beets are to be cooled, peeled and sliced thin.
Cook bacon strips in a CVap Thermalizer at 200 + 100 for 25 minutes, then crumble and set aside for the sauce.
Per pound of ground bison, mix the following ingredients:
1 ¼ tsp salt
½ tsp black pepper
¼ tsp granulated garlic
Divide bison mixture into 1 oz patties.
Advance stage in a CVap Cook/Hold at 135 + 0 for a minimum of 35 minutes or until you are ready to finish off on grill or flat top.
Small chop a can of pineapple, blend with bacon crumbles, add chopped scallions, and mix with a small amount of sweet Thai chili sauce.
On a sweet Hawaiian bun place a small amount of sauce, slider patty, mild cheddar cheese, egg, beets and serve.
One of the best things about CVap is having the ability to use it to handle precision cooking of center of the plate (COP) items without monitoring – or even having to check on it. For this blog post I got some beautiful Berkshire pork chops from Fossil Farms. I brined them in a 5% salt solution with honey and fresh thyme for two hours. What I wanted to accomplish was to have the pork chops done and ready for plating later in the day. I set up my CVap Cook/Hold to Doneness 140°F and Browning of 0. Once the CVap came to temperature and the display read “LOAD” I seared the chops and placed them on a rack inside a hotel pan.
The internal temperature of the chops at that point after searing was 85° F.
Once all the chops were seared and in the pan, off to the CVap they went.
With the CVap set to 145°F, all I had to do was wait for the moisture inside the chops to equalize with the moisture in the water pan. The Browning was set to 0 so the air temperature was 145° as well. Basically, I was using a sous-vide method without putting the chops into a bag. A few hours later I made starch and a vegetable to go along with it. When the pan was pulled out of the CVap all the chops were at precisely 145°F.
They were of varying thicknesses and weights, but all of the moisture inside the chops equalized to the temperature of the water inside the CVap. Wouldn’t it be nice to have the ability to do this with a large banquet where the party was delayed for some reason or another? When you use CVap to make your proteins this is a no-brainer.
Every pitmaster worth his or her salt knows that producing a proper brisket is something to be proud of. Between the fatty and the lean parts, there are special challenges. Smoke or cook it too long and the lean portion will dry out; but not long enough and the fat will be undercooked and not rendered enough. Allow the temperature to get too high and the brisket will be bone dry. That’s why low and slow does the trick, and CVap makes a perfect partner for brisket. You want a robust bark, a consistent smoke ring, and tender, juicy meat. No problem, right?
CVap Beef Brisket
We marinated a 3.5 lb. beef brisket in a mixture of Bourbon Barrel Soy Sauce and Worcestershire, and then liberally applied a seasoning rub.
The brisket was smoked at 200°F for about 2.5 hours, and then it went into a CVap Cook/Hold Oven set at Constant Cook ON /135°F / Browning Level 2 / for ten hours.
As you can see, the bark is set, the smoke ring is consistent, and the meat is definitely juicy! Our final yield was about 85%.
As an alternative, you could omit the smoking step and cook the brisket in the CVap overnight at the same setting to come up with this result. Again, it is juicy, tender, and very evenly done.
Please note this setting produces a brisket ideally suited for slicing. If you want a shreddable brisket, set your CVap Cook/Hold Oven to 170 + 2 and cook it overnight. Your yield will be slightly less, but it will shred beautifully.
For the perfect BBQ feast, serve your classic smoked brisket, slice it, slather it with your favorite sauce, and serve it with cole slaw, potato salad, baked beans, sweet onions, dill pickles, and sliced white bread. Oh – and plenty of napkins or paper towels!
Looking for some alternative serving ideas for brisket? Whether you smoke your brisket or not, any of these suggestions will showcase this inexpensive cut of beef very nicely:
Creative Brisket Serving Suggestions
- Chop your brisket and use it as a topping on BBQ pizza
- Make brisket tacos with cabbage, crema, and fresh avocado
- Serve brisket hash as a breakfast or brunch item
- Fill ravioli with a brisket mixture and serve with a sauce made with dark beer and caramelized onions
- Create a smoky BBQ-style brisket cottage pie topped with mashed potatoes
- Add chopped brisket to your chili for a delicious departure from ground beef
- Give your vegetable beef soup a different dimension by using sliced or chopped brisket
Memorial Day is upon us. It’s a time to reflect on the sacrifices of our men and women in uniform. It’s also the official start of the summer season. Think summer foods, and the first thing that comes to mind is burgers. Here’s a delicious twist on burgers – made better with CVap (of course).
Not only does Memorial Day begin summer, it also immediately precedes June – a.k.a. National Turkey Lovers’ Month. So what does that mean? That’s right – turkey burgers! But not just any turkey burgers – these burgers started with CVap Staging.
First a question: do any of you get frustrated when someone describes turkey burgers as being dry, flavorless, or dull? With the abundance of techniques we have at our disposal, and the enormous variety of flavor combinations to choose from, there’s just no excuse for it! And of course we love turkey as a starring protein because it is a lean, versatile option.
For this post, we experimented with two different approaches, though our base mixture was the same for both. We combined ½ lb. of ground turkey with two beaten eggs, ¼ cup of Bourbon Barrel Soy Sauce, ½ of an onion (minced), One minced garlic clove, and one cup of Panko bread crumbs. Once the mixture was gently combined, we formed 3-ounce patties and put some on a parchment-lined half-size sheet pan.
We took the other half, placed them in pouches for vacuum-sealing, and then added a little smoke for an extra dimension of flavor. It was just enough to give the burgers a subtle smokiness without it being overwhelming.
All of the patties then went into a CVap Cook/Hold Oven with Constant Cook ON, a Food Temperature (Doneness) setting of 145°F and a Food Texture (Browning) setting of 0, for 30 minutes.
To finish the patties, we pan seared them for texture and brought them to a finished temperature of 150° to 155°F (though tossing them on a grill for quick finish would work equally well). CVap Staging and then finishing in this manner yielded extremely well-textured, moist, and flavorful burgers.
The patties that were vacuum-sealed wound up being the perfect size and shape for the toasted ciabatta rolls we were using. We dressed those simply, with fresh torn cilantro and a chipotle salsa (fresh pico mixed with pureed chipotle peppers) that complimented the slight hint of smoke in the patty.
After pan-searing the more traditional patties, we treated a ciabatta bun to Sriracha mayonnaise on one side and an explosively delicious mixture of pureed onion, Bourbon Barrel Soy Sauce, and minced ginger and garlic on the other side. We finished it off with a mixture of tender baby lettuce and torn, fresh cilantro.
While the first, Latin-inspired burger was extremely tasty, the Asian-influenced burger was off-the-charts delicious. We can’t wait to make it again!
So what exactly is CVap Staging? Using this process, food is brought to the exact internal temperature desired and then held there – without overcooking or drying out – until it is time to finish and serve the dish. This means that the final flavor-enhancing and texturing touches can be made just moments before the food is served. Imagine how much faster you could push plates out of a kitchen!
For more information about the complete line of CVap products, please visit our website at winstonfoodservice.com .
May is National Barbecue Month! Nothing signifies the arrival of Summer like the rich flavor of barbecue. Recently we did BBQ a big crowd, and we had a blast doing it!
We cooked 7- to 10-lb. Boston pork butts traditionally for about ten hours on a Good-One® smoker until they reached an internal temperature of 180°F. Then they were quick-chilled on the bone and refrigerated. (Check out The Good-Ones website for some awesome smokers.) You can also add versatility to your CVap oven with the Winston Smoker Box.
The morning of the event, we rethermalized the butts in a CVap® at 200 + 100 for one hour, then pulled the pork and placed it in hotel pans. We tossed in our favorite sauce and held the pork in a CVap for three hours during service at 150 + 5.
The neat thing is that we cooked baked beans and scalloped potatoes at the same time, in the same CVap we were using to reheat the butts. So on the day of the party, we had an entire BBQ feast ready to serve in an hour and were able to keep everything fresh and hot for three more hours without babysitting anything. Best part (besides how good it tasted)? The cooks got to enjoy the party instead of slaving over the food!
Winston Foodservice celebrates the Farm to Table movement. We wanted to share one of our recipes that takes full advantage of locally-available ingredients. The texture of these tartlets were so creamy and silky! What mother wouldn’t want to be treated to this delicious treat?
Savory Basil Goat Cheese Tartlet with Heirloom Tomato and Honey Salsa
- ¾ cup Toasted Panko
- ¼ cup Grated Parmesan Cheese
- 2 Tbsp Melted Butter
Mix all ingredients together, place small amount in bottom of mini muffin pan, and press firmly.
- 33 oz. Capriole Goat Cheese
- 3 Whole Eggs
- 1 Egg White
- ¼ cup Whole Milk
- 1 TBSP Basil Pesto
Mix all ingredients together in a mixing bowl, until smooth. Pour into each mini muffin pan until ¾ full.
Place in CVap set to 200 + 0 for 5-7 minutes. Remove and cool. Serve warm in CVap set to 130 + 0.
Heirloom Tomato Salsa:
- 4 Heirloom Tomatoes (diced)
- 2 Tbsp Honey
- 1 Tbsp Red Sweet Thai Chili Paste
- 1 Tbsp Cornstarch
- Salt and Pepper to taste
Stir ingredients together, bring to boil, and cool.
Place a spoonful of salsa onto goat cheese tartlet prior to service.
I love food! And I mean all types of food. My absolute favorite style of cuisine is Hispanic – more specifically, Mexican, with its wealth of tradition and depth of flavors. What’s not to like? This year Cinco de Mayo and the Kentucky Derby fall back-t0-back on May 5 and 6. Celebrate both with a delicious Mexican recipe.
I have a group of friends I meet every Sunday at our local South of the Border establishment for lunch and a margarita or three (If I’m being honest, the food is decent, but the margaritas are the real draw!). I decided to mix it up and order one of my favorite traditional Mexican dishes: carnitas. They were less than spectacular, and I asked my friend Sergio why he thought they weren’t very good. He replied that too many people really only want fajitas on the hot plate, and this restaurant’s preparation just wasn’t traditional. To be fair, one look around the room proved that he was right. It looked like a sauna with the steam rising from every table. I was a victim of demand.
I wasn’t about to settle for this disappointment, however. Carnitas are a staple of Mexican cuisine and I mean, c’mon, it’s pork! I decided to take matters into my own hands. There are many ways to prepare carnitas, but traditionally it is shoulder meat (or leftover parts of a butchered hog) slow braised for several hours in pork lard confit style. Once the pork has been broken down enough, it is taken out and either pulled apart or cut into cubes. It then goes back into the lard with the heat turned up, and is fried to add texture. There are many twists and variations of this dish, and the part of the country you are in usually defines what ingredients and flavors your carnitas might have. For this recipe, I’m combining the old with the new and adding a splash of CVap®.
- 2 lbs. pork shoulder, cut into 1″ cubes
- 1 teaspoon salt
- ½ teaspoon cumin
- ½ teaspoon oregano
- 2 small bay leaves
- 1 cinnamon stick
- ½ orange
- ½ lime
- ½ medium onion
- ½ Mexican beer, preferably dark
- Fresh cilantro
- 2 lbs. lard or cooking oil
In a large vacuum or re-sealable bag, combine all ingredients.
Place bag in CVap Cook/Hold oven at the settings below. Drink the other half of your Mexican beer!
CVap Cook/Hold settings
High Yield Mode: OFF
Time: 8 hours
When the timer goes off, pull the bag out of the CVap oven and separate the pork cubes from the other ingredients.
Heat lard or oil in a fryer or large pot on the stove to 350°F (or medium-high heat). Carefully drop the cubes into the oil and let fry until golden brown, about one minute.
Now comes the tricky part: eat the carnitas! I usually enjoy them over a bed of rice and beans, with a little salsa on top. I also like them in a corn tortilla with diced onions, cilantro, and freshly squeezed lime. Then again, sometimes I just eat them right out of the pot because it’s fried pork and I’m impatient. There is no right or wrong here, just enjoy!
We examined corned beef brisket with two different settings that yielded two very different results.
Typically, when you order a corned beef sandwich or a grilled Reuben, you’ll find that the beef is either shredded texture or sliced. We tested to determine the ideal settings for both.
The recipe is straightforward. We used pickling spice and water to brine to briskets for several hours; and then cooked them in the brine.
The brisket that was ideal for shredding was cooked in a CVap Cook/Hold Oven at 190 + 4 for 11 hours.
The brisket that sliced beautifully was cooked in a CVap Cook/Hold Oven at 135 + 1 overnight.
Both results had phenomenal flavor and tenderness, so it really came down to personal preference, whether you wanted it shredded or sliced.
Speaking of how to serve it…
Corned beef is a St. Patrick’s Day staple, but that doesn’t mean you can’t enjoy it year-round! Take a departure from the traditional Reuben or corned beef sandwich by trying a couple of alternative combinations:
- Corned beef, kimchi, and mayo mixed with Sriracha or your favorite chili paste, served on rye bread (based on a recipe by Chef Camille Parker, Le Cordon Bleu, CamillesDish.com).
- Corned beef, horseradish slaw with Fuji apples, and smoked Gouda, served with Dijon mustard on marbled rye bread (based on a recipe by Chef Camille Parker, Le Cordon Bleu, CamillesDish.com).
- Corned beef, havarti, Dijon mustard, and sautéed or grilled onions, piled on pumpernickel rye bread and finished on a Panini grill.
Keep in mind there are more ways to serve corned beef than between two slices of bread:
- Corned beef hash with scrambled or poached eggs and toast points.
- Corned beef and mashed potatoes with parsley or dill, and braised cabbage.
- Corned beef (chopped), peas, Alfredo-type pasta sauce on fettuccine.
- Corned beef (chopped), bitter greens, and Fuji apples, served with cider vinegar/grainy mustard dressing.
- Of course, for us, a classic sandwich of tender CVap corned beef, Swiss cheese, cabbage or coleslaw, and spicy mustard on rye bread equals happy campers!
What’s your favorite way to enjoy corned beef? Please share with us on Facebook or Twitter, or leave your comments below!
Everyone’s fried chicken is the best! Or everyone has a grandmother that made the best fried chicken. I get it, I really do! Everyone has their own techniques, tricks, and superstitions when it comes to making their “famous fried chicken.” Well, my fried chicken is never the same. I do not prefer one technique over another. I am a fan of all styles. I don’t care if its buttermilk fried, Korean fried, or country fried – as long as it’s delicious and crave-able! Below, I have a recipe for a damn good piece of fried chicken. And at the end of the day, I really think that is paramount!
What makes this particular recipe great, besides that it tastes so good, is the fact that it is less greasy and can be prepared, mostly, ahead of time. CVap is the KEY to all of this. What I have done is reduced the fry time from 12-ish minutes down to 3-ish minutes, resulting in a super moist, less greasy, and crave-able fried chicken. A quick tip: the less time the chicken is in the oil, the less grease the breading will absorb!
CVap Chicken Process
The day I prepared this, I wanted something with Asian flavors. So that’s where my approach came from. Let’s get into the details of the process!
Salt – 1 tablespoon
Sugar – 1 tablespoon
Water – 2 cups
Lemongrass, chopped and pounded – 2 stalks
Star anise, toasted – 4 each
Soy sauce – ¼ cup
Black peppercorns – 1 teaspoon
Ginger, fresh – 1 small knob
Lime juice – 1 tablespoon
Jalapeno, halved – 2 each
Place all the ingredients for the brine in a small sauce pot and bring to a boil. Once boiling, place a lid on the pot and turn off the heat. Cool to room temperature. Strain and cool in refrigerator until it goes below 40F. Heat the CVap Cook and Hold to 155 F + 0F, Constant Cook On, time of 3 hours.
I prefer thighs and legs of the chicken for my fried chicken so that is what I used. In two freezer bags, I placed six pieces of chicken in each bag and split the brine between the bags. When closing the bags, try and remove as much of the air as possible to ensure that the chicken is making contact with the brine as much as possible. Once your CVap is to temp, load the chicken and press Start. Tip: For older chickens or larger cuts of chicken, increase the cook time to 4 or 5 hours. This will help breakdown the connective tissues and make it much more tender.
As the chicken is cooking, prepare the breading. There is a wet and dry step. For the wet I mixed equal parts buttermilk and coconut milk. The flour, I used bread flour because there is higher protein in bread flour. Higher protein makes for a better crunch!
Buttermilk – 1 cup
Coconut milk – 1 cup
Bread flour – 1 ½ cup
Onion powder – 2 teaspoons
Garlic powder – 1 teaspoon
Salt – 1 teaspoon
When the chicken is close to being done, prepare your pot of oil. You will want to use peanut oil because we will be frying 390F to 400F for this round. Tip: Cover your stove with foil to make cleanup much easier!
Once the chicken is done and you have the oil heating, remove the chicken from the bag and pat it dry with paper towels. When your oil comes to temp, turn down the heat to maintain that temperature and start the breading process. Dip the chicken in the wet mixture first and move to the flour mixture and back to the wet and back to the flour. That’s how you get EXTRA CRISPY. If you do not want extra crispy just go through the process once. You will want to do about four pieces at one time as to not overload the oil and you don’t want the chicken to sit breaded as it gets gummy.
Carefully put the chicken into the oil. When it is in, increase your heat on the oil to bring the temperature back to 390F – 400F. Since the chicken is already cooked, all you are trying to do is brown the breading! About three minutes in the oil will do. When you have reached your desired color, remove the chicken from the oil and let it rest on a rack. Season with a little salt.
The nice thing about this is if you don’t want to fry all the chicken you do not have to. Leave it in the bag and place it in the fridge and the next day you can fry the chicken from cold. You will need to heat the oil to about 330F – 340F, but the rest of the process remains the same. The cook process will take longer, about 8 minutes, but hey it’s still packed with all that flavor and the chicken is already cooked!
I topped mine with a mixture of sesame, scallions, soy, chili paste, lime and fresh ginger. Enjoy!
I had just finished planning a three-course dinner for some visiting customers. My goal was to demonstrate CVap versatility with contemporary applications and menu trends. I had settled on a menu that included the following:
First Course – Southern fried chicken boa with Kim Chi
Second Course – Moroccan grilled lamb loin with Tzatziki and quinoa tabouleh
Dessert – molten chocolate cake with Chantilly cream
I was quite pleased with the ethnic diversity represented by the meal as well as the variety of CVap and Collectramatic applications. With menu in hand I began to create my ingredient list and production schedule. About 30 minutes into my planning and two days before the meal, I received a note that one of our guests was vegan. What?! How was I going to make the above menu vegan? I certainly wasn’t going to offer only salad and tofu! So I set my mental wheels in motion and this is what I came up with:
Southern fried cauliflower bao with Kim chi
Moroccan grilled beets with quinoa tabouleh and silken tofu Tzatziki
Vegan double chocolate pistachio cake with whipped spiced coconut cream
But first, there were several hurdles to overcome:
Making the Kim Chi without fish sauce, where do you get the Umami?
Get cauliflower to emulate the look and feel of a fried chicken thigh!
How to get tender beets without turning them to mush…
Whipped coconut cream?!
With a little help from Alex Talbot and J Kenji Lopez-Alt and a lot of help from CVap I think we did pretty well. Here are a few pictures from our luncheon and the recipe for the Southern Fried Cauliflower. If you’d like the rest of the recipes send me a note and I’d be glad to share.
Brine Recipe for Cauliflower:
- 3 liters cold water
- ¾ cup kosher salt
- ¾ cup sugar
- ¼ cup bourbon barrel soy
- 2 stalks celery thinly sliced
- ½ small sweet onion sliced
- 6 cloves of garlic smashed
- 4 bay leaves
- 10 peppercorns
- 10 cloves
- 1 liter of ice
Directions: Place all ingredients but ice in a sauce pan and bring to a boil. Remove from heat and add ice. Store in refrigerator until you are ready to use.
- 2 heads cauliflower, cut into 2-inch thick steaks and then quartered
- 1/2 cup savory brine
- 1 teaspoon bourbon barrel soy sauce
Directions: Place cauliflower pieces in sous vide bags, cover with prepared brine, add soy, and vacuum seal. Place in CVap set on Constant Cook at 185F food doneness and 0 level browning. Cook for one hour. Place immediately in water bath to cool and then place in refrigerator until you are ready to fry the cauliflower.
Breading and Frying:
- 2 cups of your favorite breading
- ½ cup brine
Dust cauliflower with breading, dip in brine, then bread lightly with breading mix. Drop into a Collectramatic fryer set on open fry 350F for 3 and half minutes. Voila! Vegan fried “chicken”!
I’m sure I’m not the only one who builds up enough points to get a “free” turkey at their grocery store. I hadn’t had a chance to cook the one from last year before this year’s came along. So, it was time to make room in the freezer. Over the years I have explored cooking many different foods sous vide style in CVap. To be accurate, only things that are vacuum sealed can be called sous vide – it’s a French thing. The literal translation of sous vide is under vacuum in English. However, the same precision cooking that you get by sealing something in a bag and dropping it into a water bath heated with an immersion circulator heater can be done in CVap.
I pulled the turkey out a few days ahead of time to defrost in the fridge, pulled the organ meats and neck out and gave it a good rinse. Grocery store birds are technically brined with a salt solution at the factory (read the small print on the package) so there was nothing to do but get the CVap set up. My intent was to start the bird early in the morning and get it close to a final temperature of 160 degrees F so that I could finish it in a 500 degree F oven to add texture. To make sure I had an idea of what was going on inside the bird I bought a new toy that has a Bluetooth temperature probe that sent a temperature chart to my iPhone. Yeah, I’m a sucker for kitchen gadgets and this one is particularly cool. The temperature charts throughout the process. The CVap cook and hold was set to 160 doneness and 0 Browning. Essentially the CVap is acting like an immersion circulator at this point. I put the probe in the thigh joint, put the turkey in the oven and went about my day. I knew that at some time during the day the turkey would get to the set point of 160 and that it would stay there. By keeping tabs on the progress I would get an idea of when I needed to get everything else ready.
When the turkey got to 160 and all of the side dishes were done, I fired up my convection oven to 500 degrees. I put some fresh thyme and sage in a stick of melted butter and basted the turkey with it before browning it in the convection oven.
Ten minutes in the convection oven to add texture and the turkey was done! No trussing of the bird, no hassle and everything done at the same time with very little hassle. This is my method for Thanksgiving (and anytime) turkey from this day on!
School Nutrition’s Annual National Conference and Exhibit
San Antonio, Texas, is the seventh most populated city in the United States and the dry 100 degree days in July are HOT! It was definitely cooler inside the Henry B. Gonzalez Convention Center, but the action and learning was just as hot as the south central Texas days outside.
The School Nutrition Association (SNA) Annual National Conference pulls members and vendors from all across the U.S. and is likely one of the most fun events you can attend each year as a K-12 professional. We always have a great time and a great theme in the Winston booth. This year we were dedicated to Mission: Possible!
And like always, we dressed, played and had fun with the part!
This may have been one of our most active times at this yearly conference so far. Fans of CVap stopped to learn and have fun in droves.
Everyone enjoyed the Winston “Selfie Station,” nights on the Riverwalk, The Annual Membership, Star Club Breakfast, and so much more.
Honestly I have about a hundred photos and trying to choose which ones to post was not easy! My favorite though, was this shot at the airport as we were all leaving to go home. One of many examples I saw while everyone waited to board their respective flights. Another awesome time at SNA’s ANC with your CVap friends at Winston!
This question was posed to me by a restaurant owner that wanted to improve the quality and yield of his roast beef for sandwiches. And the answer is, of course we can, CVap is not just for Prime Rib!
This test was conducted at the test kitchen of my Virginia, Washington DC, Maryland representatives – High Sabatino Associates in Jessup, Md. I can’t tell you the wet spice rub that is on the top round in the pictures because he brought it already seasoned. He wanted to have the end result be medium (I’m a much bigger fan of medium rare). This test was conducted in the CAC507 cook and hold oven with the settings doneness 140 and browning 6. We set the roast time for 6 hours. When the oven read LOAD we placed the beef in the CVap and pressed start.
The top round is a tougher cut of meat than a prime rib so there is a benefit derived from extending the hold time for the product beyond the standard settings of the unit. At an internal temperature above 130 degrees F, you are breaking down the connective tissue inside the protein. This isn’t complicated, you just leave the roast in the oven. The beauty of CVap is that the roast will stay at a steady doneness temperature as long as you need it to.
In this example, we roasted for 6 hours and held the product overnight. The yield for the top round was 88% after a 6 hour roast and a twelve hour hold. A minimum of a 6 hour hold is necessary to get the right tenderness of the finished product. Too often roast beef is sliced paper thin to mask the lack of tenderization. I like a thicker slice and this method will allow you to slice the beef in slices that you can sink your teeth into.
As you can see in the pictures, there was great moisture retention and consistent doneness throughout the product. Top to bottom and end to end. I’m certain that CVap is the only cook and hold oven that can produce those results. The picture of the end of the unit was taken after a very thin slice was taken off the end, no more than 1/16” thick. Normally, there is a ½” to ¾” thick layer of meat that is done to a greater degree than the center. Improved yield, consistent and precise roasting. Plus, the roast was absolutely delicious!
Last Tuesday we had the pleasure of participating in Endeavor – The Louisville Food & Beverage Tour. Endeavor Louisville led 18 Endeavor Entrepreneurs from 10 countries on an F&B tour of the city this week, featuring site visits, panels and discussions with Endeavor Louisville board members, as well as other business leaders, involved in the industry. The tour provided an opportunity for these industry icons to deliver firsthand knowledge to Endeavor Entrepreneurs about scaling up, going big, and winning in the industry.
Winston Industries own Chef Barry Yates partnered with Chef Space Louisville’s original kitchen incubator to demonstrate how community leaders can partner to accelerate others ideas. Barry demonstrated CVap Staged New York Strip in the newly equipped Jays 120 space at the west Louisville incubator. CVap staging is a technique that allows QSR operators to drastically reduce service times while maintaining extraordinary food quality. One of the aspects we loved about this event is that guests were able to get an up close and hands on feel for how CVap technology can optimize their kitchen operations. Great food fast every time!
“Winston Industries, building on its entrepreneurial legacy, was a natural partner for the tour,” says Barry Yates, “innovation and ideas are in our DNA.” he continued. Winston Industries has expanded into four different divisions specializing in foodservice, manufacturing, electronics and ventures- to perpetuate our entrepreneurial spirit and to provide the opportunity for others to do the same.
Thank you Endeavor and Chef Space for allowing us to participate in the tour. We’ve already received great feedback from attendees and can’t wait to do more of these events in the future! If you would like to learn more about Winston Industries or have an hands on entrepreneurial experience of your own, schedule your CVap demo and cook with us! Visit our website for more info or call 502.495.5400
The trend of ordering takeout among consumers won’t be going anywhere any time soon. What Americans want from their food is convenience – number one on the list even above price (Washington Post). With longer working hours, social events, childrens’ activities, the hustle and bustle of the everyday life make it hard to sit down in a restaurant or pick up dinner. So the delivery person is now on your speed-dial. The most recent data we have comes from 2013, where 60% of Americans admitted to ordering take out at least once a week (Statista).
From fast casual to top-end restaurants, customers want the option to dine on your food in the comfort of their own homes. They not only want to take your menu home, they expect to get it now.
What’s a restaurant to do?
Beyond the obvious – quality carry-out containers that hold the food’s temperature and separate areas for takeout diners to order food, pay, and wait – a restaurant needs to be able to fill these takeout and delivery orders quickly and efficiently.
That’s where CVap® Staging ability can mean the difference between quick turnaround time (happy, repeat customer) and slow service (frustrated, hungry customer). If your side dishes are ready to go, and your proteins just need a quick sear to get the main course ready for carry out, you can let your carryout and delivery customers order and then receive their food in rapid succession. This means getting them in and out faster, so they can dine in the manner they wish.
The CVap® Staging technique allows you prepare the protein in the same way you normally would (seasoning, marinade, etc.) and then place it in a CVap oven, which has been set to the appropriate levels of temperature and texture. Once the protein has reached the doneness levels desired, it can hold at that temperature until your customer orders. It can then go to the next stage in the cooking process: searing, grilling, etc. This gets the order finished much faster than the traditional means of cooking to order without compromising on quality or taste.
Take advantage of this latest dining trend by offering takeout meals. And let CVap® Staging help you make them the best meals your customer has ever had. And things won’t be slowing down anytime soon! The next big thing is online food ordering, which is already a big hit among the younger generation.
A brief history of a continuing school tradition in America
In 1909 in Ventura, Calif., teacher Zilda M. Rogers wrote to the Agricultural Experiment Station at the University of California, Berkeley, then, a primary proponent and provider of garden education resources for schoolteachers. “With the love of the school garden has grown the desire for a home garden and some of their plots at home are very good…Since commencing the garden work the children have become better companions and friends…and to feel that there is a right way of doing everything…it is our garden…We try to carry that spirit into our schoolroom.”
School gardens have been around in Europe with the earliest records dated to 1811. It wasn’t until recently that their nationwide resurgence in the U.S. has become much more prevalent. My good friend and kitchen manager of Baker Place Elementary in Columbia County Georgia took it upon herself to get her students involved. She is loved by everyone at that school. I stopped by to see her shortly after she started this colorful start to her garden.
There is so much kids can learn from school gardens. From proper clothing to harvesting and finally being able to taste what they grew on their own school lunch lines!
One of my favorite blogs, “Ideas in Food,” created by Alex Talbot and Aki Kamozowa is about allowing your imagination to look at new and creative ways of using food. But they never fail to look at what is obvious. Their daughter Amaya has been growing food with her friends at school.
Look at these lovely lettuces she was able to bring home and show to Mom and Dad.
I’ve noticed the CVap blog is pretty bereft of vegetable preparation and is almost exclusively about the CVap Cook/Hold oven. I decided that my next blog post would feature the CAT Thermalizer Oven instead! I also wanted to see how some of my favorite vegetable dishes would work using CVap.
I decided to test three vegetable dishes: Roasted Broccoli Florets, Roasted Cauliflower and Roasted Baby Carrots. All of these veggies I have prepared in a convection oven at 425°F. Since the CVap oven only goes to 350°F I had a couple of things to consider when converting these items to CVap preparation.
I am amazed at the difference that roasting vegetables makes to kids. My daughter has always turned her nose up to broccoli no matter how many ways I have prepared it. Roasting it made all the difference.
I did three different preparations, all of them very simple and all done on Channel 5 on the CAT Thermalizer oven. This setting has a 130°F water temperature and a 350°F air temperature. This high differential allows for the greatest browning potential. I did the following items:
Baby carrots with honey and cajun spice. First, toss the carrots in a bowl with honey and Cajun spice to taste. These take 20 minutes total cook time.
Broccoli tossed with olive oil, salt and pepper. After 18 minutes in the oven I pulled the trays out and sprinkled them with grated parmesan cheese. I placed them back in the oven for 2 minutes, and then drizzled lemon juice over the top after they came out.
Cauliflower with plain yogurt and red curry paste.Toss the cauliflower florets in the yogurt with the red curry paste then add salt and pepper. This takes about 25 minutes total cook time.
Since schools are looking to increase the amount of fresh vegetables that are included in their lunches this is a perfect way to make use of equipment that is normally used to cook pizzas and breaded chicken products to make something from scratch that is very easy and healthy!